A growing number of people these days are realizing how much of a pull social media has on their lives. Turning off the 24-hour news stations is easy, but unplugging from the constant stream of targeted links online can be much more difficult to pull yourself away from. If you, like me, find yourself clicking on your Reddit or Hacker News toolbar links whenever your attention starts to drift then it’s time to take action!

With this in mind, I decided to try going a month without social link sites. And by that I mean sites that you could theoretically stay on long enough so that when you refresh there’s new content. Reddit, HackerNews and Digg are the top offenders for me. I wouldn’t put Google Reader in the same category, since eventually you’ll reach an end to your feeds (and with periodic pruning you’ll reach it faster). So I set off to work; content in the thought that no matter what I wouldn’t open any of these sites. After removing all bookmark links, things went pretty quietly for the remainder of the first day — withdrawal takes a little longer to set in.

Effects at Home

I felt the first noticeable change in behavior the first night I stopped using these sites. Generally after getting home from work, I’d veg out a little on the couch and read news from the day along with interesting articles. I’d break to eat dinner with my girlfriend, but eventually I’d continue reading more at some point during the night. What I realized what that I concentrate entirely too hard on what I’m doing. In programming, or creating things in general, this is an asset, but in this case concentrating on reading an infinitely long string of articles meant I was adding extra stress on myself while making me much less fun to be around. By not popping open Reddit, there was a refreshing feeling. It’s as if I had a lot of chores that were suddenly called off. The stress that I’d become accustomed too was gone and I ended up sleeping much better that night.

All that extra time

Chances are you have a list of books you want to read. If you’re spending all your time reading the hot blog post of the day, then this list is only going to grow in size. If you attacked this list the same way as social news, you’d probably learn a whole lot more, while cutting the stress. The amount of time you’ll gain is a bit of a shocker at first. When I realized just how much of my time was going into this though, it was unjustifiable to continue. A few minutes here, a few minutes there does really add it. If you want to track where you’re using your time, I’d recommend Wakoopa. Wakoopa is sort of a social time tracker. You can use it to track your use of desktop applications, as well as web applications. It also gives software recommendations. So for instance, if you’re using Transmit for FTP, you’ll see it’s the 2nd most popular FTP client for Mac, and you can check out some of the alternatives other people actually use. It’s convenient to have a list based on actual usage. You can also set your profile so everyone can see certain applications and web applications you’re using, or set certain apps to private. Having something public that’s tracking your usage out there is a nice kick in the butt to go through with something too.

Create something!

In the building I work at, there’s a phrase on the wall that I see everyday

The best times in life are when we are creating.

Although it’s by our landlord, who has since gone bankrupt, it’s still good advice. Thinking back over the years at previous jobs and times of my life; one thing that consistently leaps to the top is what I was creating. Times when I’m not actively working on project; or aren’t genuinely enthusiastic about some personal project are when my attention drifts and I become susceptible to distraction. One of the best ways to fight time drains is just to find something you’re passionate about and sink your time into it instead. Whether it’s blogging, programming, writing or building stuff out of Legos — it’ll feel so much better doing that instead.

Finding a place for Social Media

You might notice above I mentioned that I was planning to go a month without social media; yet the title of this post says differently. The main goal though was not to avoid using sites like this altogether, but to stop one of my biggest time drains. For now I’m keeping these sites off my toolbar. I still go to them occasionally, but now it’s only late at night if I feel like I’ve gotten something accomplished that day, and never enough to linger. Just moving the action from an automated one to a manual one was the kick I needed to regain that time.

Describing what I’ve been working on so far as a media center may not be quite sufficient. Now a days term “home server” seems to do it a bit more justice, and if a home computer is on full time you’ll certainly want to get the most out of it. If you’ve ever wanted to do backups within your home, you might’ve looked into Windows Home Server or Apples Time Capsule / Time Machine setups, but neither is quite what I was looking for. First off, I don’t really want a Windows box in (mostly) mac home, so that’s out. Time Machine alone doesn’t do everything I have in mind, although it does play an important part. I’ve had a lot of backup plans in the past, but none were quite “perfect”, which got me wondering what a perfect backup plan would look like.

What do you want in backup plan?

Just like in creating software, when setting up a backup plan it’s important to know your requirements ahead of time. Otherwise what are you working towards? So what do I want this backup plan to be able to do…

• Make it so that there is no single point of failure for any important data
• Have on site and off site backups of everything
• Backup and sync core data between macs (settings, address book, calendar, keychain, etc)
• Some kind revision system for all text files. Something like git or svn where you can rollback changes
• A local redundant hard drive array to guarantee no data loss if a single drive fails
• Backup all core documents on various time intervals (daily, weekly, monthly). That way if I mess up a file and don’t realize it for a week I’ll be able to grab the version a month ago.

Settings, Calendars, Address Book and more

If you have multiple Macs Mobile Me is a good choice for easy syncing between macs. The system has had a lot of problems, and continues to struggle with performance. iDisk, the webdav interface to your MobileMe account is painfully slow, and continues to be. Just cleaning out a few hundred empty folders was enough to stall it earlier. The online image gallery MobileMe has is one of the better one’s seen, and if you use iPhoto it’s a convenient photo storage location.

Just so that all my calendars and contacts aren’t confined to a single system (the Mac ecosystem), I use Spanning Sync to keep my Google Calendars and Google Contacts in check with iCal and Address Book. My girlfriend and I share calendars with each other on Google, and this way any changes she makes show up on my iCal, and any I make on iCal show up on hers. Also, whenever I get Google Calendar invites to my email address, they show up on Google Calendar then get syncd back to iCal. 2 way syncing is the way to go!

Complete Backups With Time Machine

Time Capsule is powerful and dead simple for full system backups. The way it works is simple: all macs on a network will have Time Machine (a program that ships with Leopard) enabled and set to use the Time Capsule hardware. Every hour or so, changes made to the core and specific folders will be pushed from the client computer (in this case my laptop) to the Time Capsule. You can specify which folders to watch for this as well. You might not want it watching your Downloads folder or others that are similarly volatile, but that’s easy to change. The first time you back up everything to Time Capsule you’ll want a hardline to it rather than doing it over a home network (even if it’s wireless N). Transferring your entire computer initially could take a full day if not, so be sure to plug it in. The hourly backups after that work wirelessly though, as they are much much smaller.

Apple’s Airport Extreme has the ability to add a remote hard drive which can serve as a Time Machine drive as well. The nice part about this is that you can use an old external hard drive you have, or choose any drive out there. Leopard didn’t originally allow you to sync with drives like this, but in one of the recent updates it was enabled. For me, after the initial backup the incremental backups are very quick if not much has changed.

Running TimeMachine for the first time is a trippy experience. You “go back in time” to the point where you want to see a file, then you can restore it. This covers a few of the requirements such as versioned files locally and full system backups with the ability to restore on any Mac.

Backups to a local RAID (or Drobo)

Finally, the first step that the Media Center can help with. Whether you go with RAID, a Drobo or something else, the backup procedure to it will be about the same.

The easiest way I’ve found to do backups to this is with rsync and crontab. Here’s how it works: Your media server will have a series of scripts setup to run daily, weekly and monthly. These scripts will do all the heavy lifting of the backup — grabbing files from every computer on your network you want to backup and moving them to the redundant array.

So firstoff the media server should be setup to backup everything from the computers on the network. That’s easy actually. On each computer you want to back files up from, go into System Preferences > Sharing and enable “Remote Login”. This will allow the media center to ssh into each laptop. Backing up using rsync can be done by mapping drives in Finder and using those paths (/Volumes/adam), or by using SSH. With SSH you don’t have to map the drive beforehand, so it is the preferred method.

On the media center, open up a text file. This will contain everything you want to copy from your client computers, and the path (on your media center) that you want to store them in.

rsync -aE --delete adam@link.local:Desktop /Volumes/Drobo/Users/adam/current
rsync -aE --delete adam@link.local:Documents /Volumes/Drobo/Users/adam/current
rsync -aE --delete adam@link.local:Movies /Volumes/Drobo/Users/adam/current
rsync -aE --delete adam@link.local:Pictures /Volumes/Drobo/Users/adam/current
rsync -aE --delete adam@link.local:Processing /Volumes/Drobo/Users/adam/current
rsync -aE --delete adam@link.local:Sites /Volumes/Drobo/Users/adam/current

Note that the destination (the 2nd path) is the same. That’s just because it’ll actually store the documents folder in “/Volumes/Drobo/Users/adam/current/Documents”. The -a option specifies “Archive”, which is actually shorthand for a few other options. It will recusively copy all directories, copy symlinks, preserve file permissions, preserve owner and groups, preserve file times preserve special files. -E preserves executability, while –delete deletes extraneous files — like those that were deleted. Save this file somewhere on the media center as a .command file. I kept it simple – backup.command. You should be able to run this script by just double clicking on it now. But there is a one major problem — authentication.

Setting up SSH keys

By setting up SSH Keys you can automate the authentication from the Media Server to any clients you want to backup. The way you do this is very easy. On the Media server, run the command ssh-keygen -t dsa. Go with the defaults, but choose a passphrase you can remember. Copy this file from the Media server to the computer you want to backup FROM. Since you should already have SSH setup, something like this should do the job.

llink:~ adam$ scp ~/.ssh/id_dsa.pub adam@link.local:~/.ssh/authorized_keys2

If you already have an authorized_keys2 file, you’ll want to add the contents of id_dsa.pub to it instead of replacing it. After that’s updated, try SSHing to that client from the Media Server. You should get prompted for the passphrase (a mac prompt, not a terminal prompt). After you enter it and save it for later you should be able to SSH without any password going forward.

Setting it up to run automatically

Not worrying about backups is the whole point of this entire system, so running it automatically is essential. Luckily Unix systems have an easy way of doing this using cron jobs. To open up the list of cron jobs, just enter crontab -e in a terminal window. This will open up the cron file using VI. Editing in VI can be a bit annoying without knowing the comamnds. To edit it you don’t need to know much VI though. Just hit “i” to go into insert mode, where you can start typing. Each line you enter is a single scheduled cron job with a very specific format. For example, here’s a line to run a script every day at 3:30am:

30 3 * * * sh ~/Dropbox/scripts/backup.command

The “30 3 * * *” part deals with when it should be run, while the part after that is what to run. Here’s what those first 5 options translate to:

• 30 – minute to run job on
• 3 – hour to run job on
• * – Day of the month to run job on
• * – Which month to run job on
• * – Which day of the week to run the job on

It’s a bit tricky to remember at first, but it’s a very simple scheduling system. For example, if you want to run something on sunday (the 0th day of the week) at 5:30 am, the parameters would be “30 5 * * 0 …”. Here’s my full crontab that I’m using (some of these scripts I haven’t discussed yet, but we’ll get to later).

30 3 * * * sh ~/Dropbox/scripts/backup.command
00 5 * * 1 sh ~/Dropbox/scripts/weekly.command
00 6 1 * * sh ~/Dropbox/scripts/monthly.command
30 6 * * 1 sh ~/Dropbox/scripts/external.backup.command


The weekly and monthly scripts will just take a snapshot every month rather than every day. Nothing much to those scripts — just removing the last update and copying a snapshot. The monthly script is exactly the same but with “weekly” changed to “monthly”. The point of this is that if anything big goes wrong, you’ll have a backup locally of the original.

rm -rf /Volumes/Drobo/Users/adam/weekly/
cp -pR /Volumes/Drobo/Users/adam/current/ /Volumes/Drobo/Users/adam/weekly/


Versioned changes with Dropbox

DropBox is probably my favorite part of all this. After signing up for DropBox, you install a small program on each computer you want to use it with. It’ll create a DropBox folder at a location you pick (I went with the default ~/Dropbox). Anything you add to this folder will get synced up to the Dropbox service. What’s extra-useful about this is that all files will be versioned. I’m storing my Documents and Sites folders in here and backing up daily. Even if I haven’t committed site changes for something I’m working on, it’ll still have a daily revision of changes.

I have a few other commands in my backup.command file that copy things over to a DropBox folder on the Media Server.

rsync -aE --delete /Volumes/Drobo/Users/adam/current/Documents ~/Dropbox
rsync -aE --delete /Volumes/Drobo/Users/adam/current/Sites ~/Dropbox


One really nice part about Dropbox’s desktop client is that you can limit the upload speed. With RoadRunner my upstream is capped to about 70k/s when it’s in a good mood, and maxing it out will usually slow down any downloads. Being able to cap it to 10k/s is very useful in my situation.

Backing up your backup scripts

You’ll notice that my backup scripts where in my Dropbox: ~/Dropbox/scripts/backup.command. Not only does this mean that you’ve backed up your scripts (always a good practice), but you can change your backup procedure from anywhere you can access Dropbox! This is so simple it’s one of the most effortless things to setup. You can also copy the contents of your crontab file

Add this line to your crontab:
@daily crontab -l > ~/Dropbox/crontab.txt
“@daily” is shorthand for “everyday at midnight”. This is a nice way of archiving any changes you make to your crontab. With the other backup scripts you can make changes on any computer and the Media Center will pull them in thanks to DropBox. But for the crontab you’ll actually want to make changes directly to the Media Center using the “crontab -e” command.

External backups of everything else

DropBox is free up to 2GB making it excellent for documents, but not very realistic for media. They do offer a plan up to 50GB for $99/yr, which blows MobileMe’s 20GB plan out of the water. Most the use I get from MobileMe is in syncing computers though, so I’ll keep it going for that. For now I’ll stick with MobileMe for my larger media backup as well, although I can tell you now I’m not exactly happy about it.

One of the downsides of MobileMe is that it doesn’t automatically mount itself on startup. Normally you have to click on it in Finder to mount the drive. Only then it’ll show in “/Volumes”. You can open up Script Editor and create a small app to do this though. Just copy this and change it to use your username and password.

tell application "Finder"
mount volume "http://idisk.mac.com/myusername/" as user name "myusername" with password "mypassword"
end tell


Save it as file format “Application” with “Run Only” checked, but don’t check “Stay Open” or “Startup Screen”. Save this application somewhere then add it to your startup items.

The last part is setting up the “remote.command” script listed earlier. This will do all the work of copying everything remotely, with the exception of whatever uses Dropbox.

rsync -aE --delete /Volumes/Drobo/Users/adam/current/Documents /Volumes/myusername
rsync -aE --delete /Volumes/Drobo/Users/adam/current/Backup /Volumes/myusername
rsync -aE --delete /Volumes/Drobo/Users/adam/current/Desktop /Volumes/myusername/Documents
rsync -aE --delete /Volumes/Drobo/Users/adam/current/Movies /Volumes/myusername
rsync -aE --delete /Volumes/Drobo/Users/adam/current/Pictures /Volumes/myusername
rsync -aE --delete /Volumes/Drobo/Users/adam/current/Sites /Volumes/myusername
rsync -aE --delete /Volumes/Drobo/Books /Volumes/myusername/Documents


This just runs weekly everything here doesn’t change that much. The Pictures directly is the main one that’ll be updated, as it’s a single iPhoto file that changes often.

Woh, that’s a lot. Did we miss anything?

Well, two things were skipped — Music and Videos. I have a decent sized music collection, and I tend to archive my DVDs for use with Plex. Backing up 2TB of data remotely when you’re limited to 70k/s upload speeds isn’t exactly possible. What I am doing is storing all my media on a Drobo which protects it against a single hard drive failure (maybe more, depending on when the failures occur). My TimeMachine drive is actually a 500gb drive split – 200 for Time Machine and the rest for media backup. Every night the Media Center pushes all music from the Drobo onto this external drive. At least that way all my music is protected in case the Drobo itself fails. There’s no external backup for music, but I’m OK with that. If I was a little more paranoid I might archive weekly and leave the drive at work or something, but that’s where I draw the line.

That leaves one gaping hole – the movie collection this system was for in the first place! For now I’m content with being protected against a single HD failure with the Drobo, but if anyone has any suggestions on how to back this up I’m all ears. Also if you think of anything else I missed, or just something I could do better then please leave a comment!

Did this help?

If this article helped you, please sign up for DropBox! DropBox was in beta for a while, but now it’s open and anyone can sign up. You get 2GB of space just for signing up. They have the added bonus of increasing your space by 250mb for everyone you refer (up to 5GB total), so by signing up you’ll give me more space to experiment with. It’s easily the best backup service I’ve used, so I’m looking forward to seeing how it grows.

It’s taken me a while to jump on the Quicksilver bandwagon. If you’re a Mac user chances are you’ve run into QS as some point, as it seems to be one of the core apps that most hardcore mac users recommend. There are tons of great links on del.icio.us, posts by Merlin Mann and even screencasts. Safe to say it’s here to stay, and with it now open source and hosted on Google, it has a future ahead of it.

Explaining what Quicksilver is might best be left to the wikipedia entry, but to put it short Quicksilver is used to launch apps and control them using short, quick keystrokes. The hardest part about Quicksilver may just be finding out how can use it to make things you do faster. One of the best ways to handle this is to actively think about anything you do often and see if it could be done using Quicksilver. There’s a few Quicksilver tasks that I’ve recently started using that might be useful.

Add Items to a RememberTheMilk.com todo list
I’m a recent convert to RememberTheMilk and it’s related IPhone app, so linking these extremely common tasks was a top priority. There is a quicksilver plugin for remember the milk that makes this quick. Initially when the plugin is added, you’ll need to authorize it to work via the quicksilver preferences. After that it’ll import your task lists and make them available to add to directly. Putting them all together it looks like this.

Send tickets to a Lighthouse app project
There’s no magic plugins for this one — just the basics. Lighthouse allows you to create tickets by email for a specific project. Just about any bug tracking/project management app has a similar capability that can be invoked via Quicksilver. There’s a number of different ways to do this, but the basic one is to create an entry in Address Book titled something related to your app. It has the added bonus of being able to add a contact image that will show up in Quicksilver.

Get fast access to commonly used text
One feature of Quicksilver that gets a lot of coverage is the Shelf. It’s basically a way to access things fast. These “things” can be plain text, folders, applications — basically anything that shows up in quicksilver in the first pane. To enable the shelf, go to plugins in preferences and make sure the “Shelf module” is checked off. After that you can try putting something on the shelf to test it out. To do that just enter some text in the first pane, and then put on shelf

After you have at least one item on the shelf, you should be able to pull it up in the first pane using shelf. show contents is used to get a list of what’s actually on your shelf.

This Shelf > Show Contents combination gets old real fast, so you might want to consider moving this to a trigger. In Preferences > Triggers > Custom Triggers you can create a new keyboard command that jumps you straight into the shelf. I went with option+command for this. Only takes a few keystrokes!

What killer users for Quicksilver have you found? Or perhaps other uses for the shelf?